Princess 30.2 m.
Main Characteristics
Length O.A.: 99 ft. / 30.18 m.
Beam: 7.05 m.
Engines: 2x 2637HP MTU
Cruising Speed: -
Top Speed: -
Fuel Capacity: 12200 lts
Water Capacity: 1600 lts
More info
Built by Princess UK in 2017
Cabins: 5  |  Guests: 10
Asking Price
Length overall (incl. pulpit): 99ft 11in (30.45m)
Beam 23ft 2in (7.05m)
Draft: 6ft 9in (2.06m)
Displacement approx: 108 Tonnes
Gross Tonnage 162 Gallons
Fuel capacity: 2,684 gal/3,223 US gal/12,200 L
Water capacity (Excl. calorifier): 352 gal/423 US gal/1,600 L
ENGINES AND DRIVE TWIN MTU 16V 2000 M94 (2 x 2637mhp) (engine hours :2534 hours)
ENGINES AND DRIVE Extended range fuel tank (additional 2,300 liters to give 14,500 liters total)
ENGINES AND DRIVE Wasp oil change out unit to cover engines, gearboxes and generators
STABILISATION TRAC 12 X Fin Stabilizer system to provide stabilization underway and also zero speed stabilization. An additional electro-hydraulic motor powers the system for zero speed stabilization when the main engines are shut down
INTERIOR FLOORING Saloon and dining area flooring to be timber with carpet inserts. All timber to run in same direction
LAYOUT 5 guest cabin layout incorporating two aft VIP staterooms on the lower deck. Saloon dining table to seat up to 10 persons with 2 additional chairs provided
LAYOUT Saloon seating to have bespoke U-shaped seating with arms rests and both ends and square into the corners
LAYOUT Wheelhouse helm seat with footrest and electrical adjustment in lieu of standard Captain's seating perch
LAYOUT Starboard side folding balcony with sliding doors to the saloon
LAYOUT Custom flybridge layout with; - forward facing seating at forward end with bars behind - standard U-shaped flybridge sofas in centre - 2 aft sunpads on either side and seating forward
DECK HARDWARE Flybridge to have composite construction GRP hardtop (in place of standard radar arch) incorporating overhead LED lighting
DECK HARDWARE Flybridge GRP hardtop to have electrically operated opening center section in white fabric
DECK HARDWARE Side mount stairway with hull fittings port and starboard and with storage in foredeck locker
ELECTRICAL Continental 220v/240v sockets
ELECTRICAL Underwater transom lights (4 Super Blue OceanLED) 2 x 40 kW generators HOURS 7100
AUDIO, VISUAL & COMMUNICATIONS CCTV system with two fixed cameras in engine room and one in cockpit facing aft with monitoring in the wheelhouse
Custom made music system on all the yacht

Standard Navigation equipment incorporates:
A "glass bridge" display with 2 xRaymarine 15.4"
Gs series high definition screens in the wheel house with remote
control and 1 x 15.4" Gs series screen on the flybridge. Wheelhouse
screens display radar, chart platter, GPS, CCTV(engine instrumentation
are displayed at both control positions via HD screens).
Raymarine 4ft/4kw open array HD color radar is also standard supply .
Additional Raymarine 15.4 gS series screen on flybridge (totaling 3 screens)
NAVIGATION Raymarine AIS Class B transponder
NAVIGATION 8.8" Boning monitor screen fitted in Captain's Cabin
SOUND INSULATION Additional sound insulation (Dynomat) requested to be fitted under saloon and dining floor as well as forward engine room bulkhead
ELECTRICAL 2x ice makers are fitted on the 30M. 1 in the upper deck wet bar and the other in the galley
ELECTRICAL 2 Idromar water maker 275/hr
ELECTRICAL digital fuel gauges at fuel filler points
ELECTRICAL electric blinds in saloon / dining area and master stateroom and all lower cabins
AIR CONDITIONING all air conditioning fan units to have whisper kits added to them to reduce noise
DECK HARDWARE 30M has a 3rd station in cockpit
ENGINES AND DRIVE MTU engine silencers fitted for extra sound proof for the engines

BATHROOMS all toilets to be upgraded to combination toilets including day head and crew. bidet in master stateroom

AUDIO, VIUSAL & COMMUNICATION Savant home automation with Ipads

LAYOUT Additional 2 berth crew cabin with bathroom fitted in stern lazarette

ELECTRICAL All lower deck guest cabins to have electric blinds

GALLEY Fit trash compactor in galley

ELECTRICAL Bow docking lights

LAYOUT Supply and fit L shaped aft facing seat cockpit seat in place of standard cockpit wet bar. Seat back to be same height as saloon U shaped seat so it is mirrored either side of the patio door. 2 x drawers required under seat for storage

SOUND INSULATION Additional sound insulation (Dynomat) requested to be fitted to master cabin flooring and bulkhead between galley and master cabin

ELECTRICAL option anchor chain counters

DECK HARDWARE pole style retractable deck shower in place of standard

AUDIO, VISUAL & COMMUNICATION Sizes of standard TV's requested by client. Saloon 65", Master stateroom 46", lower guest cabins 32"

ELECTRICAL Fit Boning CCTV system in place of standard allowing CCTV to be displayed on Boning screens throughout the boat

SOUND INSULATION Additional sound insulation (Dynomat) requested to be fitted to the bulkhead between the crew accommodation and lower deck guest accommodation

DECK HARDWARE Sun awning covering area 4m aft of flybridge hardtop (featuring carbon fiber poles, stainless steel fixtures, lightweight hydrophobic canvas top with hidden pulley system)
LAYOUT Sofa requested in master stateroom with drawers either side of sofa

STABILISATION Larger more powerful stabilizers

NAVIGATION 10" Boning screen is mounted in crew mess in place of captain’s cabin

ELECTRICAL Supply and fit Kenyon BBQ's in place of standard

LAYOUT captains cabin bed is made larger / wider at head end
All guest wardrobes to have mirrors on outside to enlarge look of cabin size.
Dining bulkhead to be clear mirror with stainless border
Lower lobby cupboards to have mirrored fronts

ELECTRICAL Elsafe Safes in place of standard in Master Stateroom and Crew

INTERIOR FLOORING Leather non slip treads requested on stairs to wheelhouse and from wheelhouse to flybridge Passerelle aluminum two-piece frame Passerelle with a stainless steel nish. Stainless handrails on both sides, blue led strip lights on both sides of platform and stainless cut at end with vessels name and back lighting Cockpit L-Shaped Seating Supply and t a custom molded L-shape seat in the cockpit with removable seat back and cushion to match the remaining exterior fabric. With drawers underneath and designed and agreed before construction RGB Lighting – Flybridge Supply and t RGB LED rope lighting to the bases of all of the Flybridge seating. All lights to be on a separate single switch and remote controlled

RGB Lighting – Saloon Supply and t RGB LED rope lighting to the underside of Saloon seating. All lights to be on a separate single switch and remote controlled KVH SATTELITE TV ANTENNA 1 x kvh HD11 dome to mast plus one dummy empty dome same size LSA Life rafts To supply x2 8 man ISO 9650 SOLAS B slim pack canister rafts (800x520x310) to mount inside foredeck locket with mounts and straps to secure Supply a throwing rescue line in sock Supply a fire blanket Supply a Kannad Safelink CAT1 EPIRB Supply x2 hydrostatic release for life raft Mirrors to Lower Lobby To supply and t 3 horizontal clear mirrors to the bulkhead in front of stairs going to lower lobby Crew Mess TV To supply and t 32″ TV in crew mess with x2 Ke speakers linked to central AV system Galley Servery To remove servery top with sink and replace with black Quartz (same as galley) worktop without sink Master Heads Mirror To remove the standard two mirrors and supply and t one single mirror with same height dimension, but width to reach end to end above worktop. With recessed secret rope lighting at bottom Lower Cabin Mirrors To supply mirrors in same sections of standard upper material nished panels (2 piece mirrors in aft cabins and 3 piece mirrors in forward cabins) on the inboard bulkheads of all 4 cabins (as per photo shop drawing), including relocating switches as required to not be on mirrors. Lower Cabin Bulkheads To change both fwd and aft bulkhead lineout materials in all 4 lower cabins to Lizzo Fugo TF8033 Fuel Station a fuel transfer pump system from day tank to garage, with trigger nozzle in garage for use to ll tender 24volt pump c– Waterproof to IP54 – 40Ltrs per min pumping rate Pop Up Cleats To remove standard xed cleats from bathing platform, re teak and supply and t same size 316 stainless pop up cleat (as per picture) that sits ush to deck when down. These are special order pop up cleats that have a 27ton loading (the standard PYI led cleats are 22ton), so they can be used for securing not only tenders but also safely the vessel. Extension of Captain’s bunk To further modify and extend captains bunk inboard by another 200mm, manufacturing extension to bunk, plus upstand. Cutting side unit in half and rebuilding and respraying to nish good. Also supply and t custom made mattress for the extension

Extra Sockets Flybridge – X1 single water proof socket port side wetbar locker below sink / Wheelhouse – x1 single socket forward end of port seating / Saloon – X1 double socket forward of stbd side side unit by lobby entrance and X1 double socket aft port corner saloon / Galley – x1 double socket aft corner of servery top / Master cabin – X1 USB 2amp socket either side of bunk (total 2)plus X1 single socket either side of bunk / Port aft lower cabin – X1 USB 2amp socket either side of bunk (total 2) /stbd aft lower cabin – X1 USB 2amp socket either side of bunk (total 2) / Stbd forward lower cabin – X1 USB 2amp socket either side of bunk (total 2) / Port forward lower cabin – X1 USB 2amp socket either side of bunk (total 2) / Garage/Lazerette/cockpit – X1 weatherproof socket in garage – X1 weatherproof socket in Lazerette in board side – x1 weatherproof socket in cockpit seating stbd corner / Crew x1 single and X1 USB in captain cabin, change both single sockets to double and add USB in other 2 crew cabin. Total x4 single, x3 double, x13 USB, x4 weatherproof and x2 upgrade from single to double (drawing to clarify position) Aerial Change To remove standard whip antennas on aft hardtop and supply and t 1m antennas on radar mast UPS for AV system 2000W UPS to allow seamless change over from AC power source to prevent losing data (from Generator to shore) Cooling for AV rack 1.4m x 0.6 x 0.6m AV rack (assuming suitable size for kit being tied) AV Rack 1.4m x 0.6 x 0.6m AV rack (assuming suitable size for kit being tied) Cup Holder stainless dual cup holders on in front of port fwd U seating on outboard side and inboard side (as per picture) Robe Hook stainless robe hook to back of master heads door Racks above Engines aluminum/white power coated racks with upstands above port and stbd engines. For use to mount water makers and general storage Stair Gate stainless steel stair gate at top of Crew stairs, including handle re-upholstery work, keeps Removable Swim Ladder Stainless steel ladder with teak treads with sockets to mount to bathing platform when required Fridge in Cockpit To custom make a coolbox into the port side cockpit unit, remove teak and make teak lid with landings for top access to coolbox. Supply and t compressor for coolbox Boarding Ladder Cover To supply and t a white cover to cover boarding ladder stowage on stbd side deck Generator Sound Insulation To supply and t dynomat sound insulation around generator casing to improve sound levels

Separate Light Switch in Master Cabin To separate the under bunk and under step lights in master cabin with the overhead light switch iPad Mini 4 mini WiFi 16GB (5 black, 4 white) Cup Holders – Sunbeds To supply and t dual cup holders to side of both fbridge sunbeds AV Support Work To install x2 16amp breakered power supplies, plus supply and t x2 24-12v converters (24amp) Additional Sound Insulation To remove all crew cabin area headlining, dynamite all the matrix’s and install Rockwool sound insulation to further deaden the sound levels between crew area and master cabin Mirrors to Captain’s Cabin Cabinet mirror to mount on captain’s Cabin Cabinet door front above small drawer Deck Shower easy in Elka 7080 removable deck shower, with rain shower head. This includes removing the PYI deck ttings and install the Elka deck tting and making special custom ttings and making hot and cold supply to t under the deck (hoses won’t be seen). Mixer is on the shower itself. Shore Power Cable 5mm cable (32amp) 30m shore power Locker Door alter the cockpit locker door to enable storage while seat in tied Captains Cabin alter the drawers below the captains bunk to allow access now bunk is extended Seabobs (NO SEABOBS SUPPLIED WITH THE SALE OF THIS YACHT) weld brackets for the mounting of the Seabobs Captain’s Cabin the captain’s cabin vanity unit drawer Seabob Power To supply and t break red power supply for all 3 Seabobs in the garage, plus supply materials for captain made rack in garage Cover cockpit seat Cockpit seat cover

View more
View less