The 146'6 / 44.65m custom motor yacht was built by Feadship in Netherlands at their De Kaag shipyard , she was delivered to her owner in 2007. The yacht's interior has been designed by Donald Starkey.

Configuration

Owner: Full beam Stateroom forward with dressing area, en-suite bathroom with bathtub and separate shower, 2 sinks and separated toilets with bidet. Separate Owner’s office on the bridge deck. Note that Owner’s office could be converted into 5th cabin (with en-suite).

Guest:
2 x Double cabins with en-suite shower room
1 x Twin cabin with en-suite shower room

Crew:
1 x Double Captain’s cabin with en-suite shower room
4 x Twin upper and lower berth cabins with en-suite shower room

Owner’s Suite
Owner’s suite is located forward on the main deck, decorated in a classic contemporary
style with a mixture of wood, leather panelling and modern features. It boasts a super
king bed, spacious bathroom, his and hers heads, bidets, shower and bathtub, underfloor heating and heated towel rails.

Guest Accomodation
Three further guest cabins are located on the main deck. There is a twin cabin on the port side aft of the Owner’s Suite followed by two double cabins, one to port and the other to starboard. Like the Owner’s cabin they too are furnished in classic contemporary style with a mixture of wood and leather panelling with modern features. Both doubles have a queen sized bed, an en-suite bathroom and toilet.

Communications Equipment

SatCom: Seatel 4006/9 VSat, 1 x Sailor Satcom-C H2095C 10,4” TFT display, printer unit

Radio Telephones:
1 x Sailor 4000 SSB Marine radio telephone
receiver 150W PEP
10m antenna
1 x Sailor RT-4800 VHF radio telephone, handset with cradle, speaker for wheelhouse, slave handset and speaker in crew mess
1 x Sailor RT-5022 DSC simplex/semi duplex VHF radiotelephone with handset and cradle

VHF Radios:
2 x Jotron TR-20 GMDSS 19 channel handheld VHF radios

AIS / GPS: 1 x Furuno F150 AIS/ GPS system

DGPS: 1 x Furuno GP-90 DGPS system

GSM: 2 x Ericsson F251m fixed tri-band cellular terminals

DECK EQUIPMENT

Anchor Windlass: 2 x Staalart dual rotation and two speed control

Capstans: 2 x Staalart with dual rotation and single speed

Boarding Ladder: 1 x removable polished stainless steel and teak steps swimming ladder for mounting at the swim platform

Riviera Gangway: Electric / hydraulic driver Riviera gangway, starboard aft. Folding type with max outreach of approx. 4m and width of approx. 600mm, rotate sideways through an angle of 45° and raised / lowered through an angle of 15° from the horizontal

Anchors: 2 x 385kg type balanced Pool high holding power galvanized bow anchors

Anchor Chain: 2 x 165m 22mm Grade U2 galvanized stud link chain (replaced 2018)

Ship’s Bell: 1 x Polished stainless-steel ship’s bell of 300mm

NAVIGATION EQUIPMENT

Gyro Compass and Autopilot:
1 x Anschuetz Standard 22G/GM gyro compass with readout on conning display and repeated in the aft peak
1 x Anschuetz NautoPilot 2015 automatic pilot

Chart Plotter: 1 x Transas NS-3000 chart plotter with 19” colour TFT display Hatteland, ARPA overlay, tracker ball and cordless keyboard, UPS and TV interface

Echo Sounder: 1 x Furuno FCV 852L echo sounder, dual frequency (50/200kHz) transducer, water temperature sensor and data output to conning screen

Navtex: 1 x Furuno NS700A navtex receiver

Speed log: 1 x Furuno DS-80 Doppler log

Radars: 2 x Furuno FAR 2117 (1 x 230VAC,1 x 24VDC) with 12kW X-band transceiver, 19” TFT display Hatteland, scanner unit, ARPA module, Gyro.log interface and interfacing for
ECS and GPS

Anemometer: 1 x Furuno RO ply anemometer for true and relative wind, barometric pressure, air temperature on the conning display

Compass: 1 x Observator MK4 magnetic compass with Anschuetz flux gate